H40 ECO RAPID 25KG (GREY)

Professional, single-component adhesive with SAS (Shock Absorbing System) Technology, extra-rapid setting and hardening, suitable for high-resistance laying and overlaying up to 10 mm thickness of homogeneous tiles, ceramic tiles of all types, large-format paving slabs and natural stone on both flooring and walls.

EXTRA-FAST HARDENING AND SETTING – Restructuring work, short and secure periods of intervention for completion of work also at low temperatures require a high-technology adhesive. H40® RAPID develops a specific technology which allows for high performance after only a few hours, ensured by a mix of rapid, high-stability hydraulic binders. Setting-adjustment polymers and micro-components which intervene in the hydration kinetics of cements ensure prolonged workability, similar to that obtained with adhesives with normal setting times.

THICKNESS UP TO 10 mm – Irregular, broken natural stone, homogeneous large- format tiles and non-planar substrates require high-thickness applications of adhesive. The H40® RAPID technology can be used to achieve thicknesses of up to 10 mm without causing tension in covering materials and with high values of adhesion, ensured by the use of specific thixotropizing polymers which regulate the release of water and increase adhesion.

SAS - (SHOCK ABSORBING SYSTEM) TECHNOLOGY – The exclusive SAS testing method reproduces real on-site conditions by simulating the most severe thermal and mechanical strain, which no other adhesive has ever had to withstand. H40® RAPID reflects a technological superiority, with cycles of strain used in the most highly advanced Safety-Test developed for cement- based adhesives.

Laying of ceramic tiles and stoneware of all types, marble and natural stone on flooring, walls and on cement-based and non-absorbent substrates. Thicknesses up to 10 mm.

Materials:

• homogeneous tiles, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats
• natural stone, recomposed materials and marble not subject to high deformation or sudden staining due to water absorption

Substrates:

• cement plasters and cement-lime mortar
• cement-based screeds or screeds produced with REKORD® and KERACEM® as binder or ready-mixed
• prefabricated concrete or fresh concrete castings
• existing flooring and coverings with enamelled tiles, cement-based and resin paving, stoneware
• heat-radiant slabs
• cement-based waterproofing compounds such as the waterproofing, two-component IDROBUILD® system
• walls in concrete blocks, cellular concrete and plasterboard

Use

Flooring and walls, indoor/outdoor use, in civil, industrial and commercial applications and for street furniture, also in areas subject to thermal shock and freezing.

Do not use

On gypsum-base plasters and anhydrite screeds without the use of PRIMER A professional, concentrated, water- base, surface insulation product; on plastic or resilient materials, metals and wood; on substrates subject to continuous moisture rising.

DOWNLOAD INSTRUCTIONS FOR USE

You may also be interested in this/these product(s)

H40 ECO MARMOREX 25KG (WHITE FAST SETTING) £50.46

H40 ECO TENAFLEX WHITE 25KG (SLOW SETTING) £40.27

H40 ECO TENAFLEX GREY 25KG (SLOW SETTING) £38.75